Precision CNC Machining
A forging is only half a component. Our machining shop takes the forged blank straight from heat treatment and finishes it to drawing on CNC turning centres and vertical machining centres, so you buy a ready-to-fit part with one purchase order and one quality report.
- Machining Tolerance
- ±0.02 mm
- Surface Finish
- Ra 0.4 – 1.6 µm
- Turning Diameter
- Up to 500 mm
- VMC Travel
- Up to 1,000 x 500 mm
- Inspection
- CMM-grade layout, gauges, comparators
- Output
- Ready-to-assemble components
Precision CNC Machining at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Machining Tolerance: ±0.02 mm
- Surface Finish: Ra 0.4 – 1.6 µm
- Turning Diameter: Up to 500 mm
- VMC Travel: Up to 1,000 x 500 mm
- Inspection: CMM-grade layout, gauges, comparators
- Output: Ready-to-assemble components
Turning, Milling, Drilling, Grinding
CNC lathes handle diameters, faces, bores, grooves and threads; VMCs handle faces, slots, pockets, drilling patterns and tapping; cylindrical and surface grinding finish the features that need sub-micron surface quality. Fixtures are designed in-house so forged datums are held repeatably.
- CNC turning centres with live tooling
- Vertical machining centres for prismatic work
- Cylindrical and surface grinding
- In-house fixture design
Tolerances and Surface Finish
Routine work holds ±0.02 mm on critical diameters and Ra 0.8 µm on turned surfaces, with ground features reaching Ra 0.4 µm. Concentricity, runout and perpendicularity are verified on height gauges, bore gauges and, for complex parts, on layout inspection against the model.
One Supplier, One Traceability Chain
When forging and machining sit under one roof, a dimensional problem is traced to its forged origin in hours instead of being argued between two vendors. Material certificates, heat treatment charts and dimensional reports travel with the same batch number all the way to dispatch.
People also ask
What tolerance can you machine forgings to?
±0.02 mm on turned and milled features, and ±0.01 mm with Ra 0.4 µm where grinding is applied.
Do you machine forgings supplied by other manufacturers?
Yes, machining job work on customer-supplied forgings and castings is accepted with incoming inspection.
Topics covered on this page
- precision CNC machining Rajkot
- CNC machined forgings India
- VMC machining services Gujarat
- machined forged components supplier
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do you machine forgings made by other suppliers?
+
Yes, we accept machining job work on customer-supplied forgings and castings, subject to incoming material verification.
What tolerance can you hold on production runs?
+
±0.02 mm is routine on turned diameters; tighter functional fits are achieved by grinding.
Do you supply inspection reports?
+
Every machined batch ships with a dimensional report against the drawing, and material and heat treatment certificates where applicable.
Can you handle small machining batches?
+
Yes. Setup-efficient fixturing makes batches from 25 pieces upward viable.