Automotive Forging
Automotive forging is defined by three things: safety criticality, volume, and documentation. A part that performs beautifully but cannot be traced, measured and proven batch after batch will not survive an OEM audit.
- Certification
- ISO 9001, IATF 16949 aligned
- Documentation
- PPAP, PFMEA, control plan
- Inspection
- 100% on safety-critical parts
- Typical Volume
- 5,000 – 50,000 pcs/year
- Materials
- 20MnCr5, 42CrMo4, EN19, micro-alloyed
- Traceability
- Heat number, billet to dispatch
Automotive Forging at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Certification: ISO 9001, IATF 16949 aligned
- Documentation: PPAP, PFMEA, control plan
- Inspection: 100% on safety-critical parts
- Typical Volume: 5,000 – 50,000 pcs/year
- Materials: 20MnCr5, 42CrMo4, EN19, micro-alloyed
- Traceability: Heat number, billet to dispatch
Safety-Critical Discipline
Steering, braking and suspension parts are category-one components. Each is 100% inspected, heat-number marked and documented, because a field failure becomes a recall, not a credit note.
- 100% NDT on safety-critical parts
- Heat number marked on each piece
- PPAP and control plan documentation
- Cpk monitored on key characteristics
Volume and Consistency
Automotive schedules run in tens of thousands. What matters is not the best piece but the worst one — so process capability, die maintenance intervals and gauge control are managed as production disciplines rather than inspection afterthoughts.
Parts We Supply
Connecting rods, crankshafts, camshafts, steering knuckles, tie rod ends, wheel hubs, axle shafts, gear and pinion blanks, suspension arms, brake camshafts and transmission components.
Topics covered on this page
- automotive forging manufacturer India
- auto component forging supplier
- IATF 16949 forging India
- automotive forged parts Rajkot
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do you supply to automotive OEMs?
+
Yes, to OEMs and tier-one suppliers in India and export markets, with the documentation package each requires.
Can you provide PPAP?
+
Yes, PPAP level 3 including control plan, PFMEA, process flow and dimensional results.
What is your automotive lead time?
+
Three to five weeks for first article with new tooling; production releases run against agreed schedules.
Do you handle EV components?
+
Yes — motor shafts, reduction gear blanks, battery mounting hardware and suspension parts for electric vehicle platforms.