Power Plant Forging
Power plant components run hot, continuously, for decades. Creep, thermal fatigue and oxidation all act at once, so grade selection and heat treatment discipline matter as much as the forging itself.
- Materials
- A105, F11, F22, F304, F316, alloy steels
- Temperature Service
- Up to 550 °C grades
- NDT
- UT, MPI with certified reports
- Certification
- EN 10204 3.1
- Inspection
- TPI and utility inspectors welcome
- Applications
- Thermal, hydro, cogeneration plants
Power Plant Forging at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Materials: A105, F11, F22, F304, F316, alloy steels
- Temperature Service: Up to 550 °C grades
- NDT: UT, MPI with certified reports
- Certification: EN 10204 3.1
- Inspection: TPI and utility inspectors welcome
- Applications: Thermal, hydro, cogeneration plants
Elevated Temperature Service
Above about 400°C, creep becomes the governing mechanism. Chromium-molybdenum grades F11 and F22 are specified because they resist creep and oxidation over a design life measured in decades.
- Creep-resistant Cr-Mo grades
- Thermal fatigue considered in design
- Full NDT on pressure parts
- Long-term certification retained
Pressure Part Discipline
Boiler and steam-side components are pressure parts. NDT, material certification and traceability follow the same discipline as oil and gas work, with third-party inspection routinely involved.
Parts We Supply
Turbine casing hardware, valve and steam line fittings, boiler flanges and fittings, high-temperature fasteners, coupling components and rotor-adjacent shafts and hubs.
Topics covered on this page
- power plant forging India
- turbine component forging supplier
- boiler forged parts manufacturer
- power sector forging Gujarat
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Which grades suit high temperature service?
+
F11 and F22 chromium-molybdenum grades for creep resistance; austenitic stainless where oxidation and corrosion dominate.
Do you supply boiler pressure parts?
+
Yes, flanges and fittings for boiler and steam service with full NDT and certification.
Is third-party inspection accommodated?
+
Yes, utility and TPI inspectors witness at our works by appointment.
What documentation is provided?
+
Material certificates, heat treatment charts, NDT reports and dimensional records, retained for long-term audit.