Forged Agricultural Blades & Tines
Ground engaging tools wear from the moment they enter the soil. Every hour of work removes material, so the economics are entirely about how many hectares a part covers before replacement.
Forged agricultural blades and tines face continuous soil abrasion plus sudden stone impact. They carry a working edge hardened to 45–55 HRC over a tougher body, in EN9, EN45 and boron steels, so impact bends rather than shatters the part.
- Materials
- EN9, EN45, boron steel
- Hardness
- 45 – 55 HRC working edge
- Products
- Shovels, tines, blades, points
- Finish
- Painted or oiled
- Batches
- 5,000 – 50,000 pcs
Forged Agricultural Blades & Tines at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Working edge hardened to 45–55 HRC
- EN9, EN45 and boron steels
- Hardened edge over tougher body
- Batch quantities 5,000 to 50,000
Abrasion Plus Impact
Soil abrades continuously while buried stones deliver sudden impact. A fully hardened blade shatters on the stone; a soft one wears away in a season. The answer is a hardened working edge over a tougher body.
- Continuous soil abrasion
- Sudden impact from stones
- Hardened edge, tough body
- EN9 and boron steels
Edge Geometry and Draft
Blade profile determines how much tractor power is consumed dragging it through soil. A worn or badly shaped edge increases draft, burning fuel continuously — which is a real cost farmers notice before they notice the wear itself.
People also ask
Why do agricultural blades wear out so fast?
Soil is continuously abrasive, and sandy or stony ground accelerates it dramatically. Wear life is measured in hectares covered rather than in hours.
Can blade life be improved?
Often, by matching hardness to the actual soil type and by hard-facing the leading edge. Send a worn sample and we will assess the wear mechanism.
What quantities do you supply?
Production batches of 5,000 to 50,000 pieces, which is the normal scale for agricultural implement manufacturers.
Topics covered on this page
- cultivator shovel
- tine
- rotavator blade
- plough point
- abrasive wear
- boron steel
- EN9
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
What hardness should agricultural blades be?
+
45–55 HRC on the working edge, with a tougher body so stone impact bends rather than shatters the part.
Which steel is used for tines and shovels?
+
EN9, EN45 and boron steels, chosen for a balance of abrasion resistance and impact toughness.
Do you supply painted blades?
+
Yes, painted or oiled for seasonal storage and dispatch.